木材剥皮机特点
Characteristics of wood peeling machine
1、采用四面刃刀具，使用方便，成本低。
1. It is easy to use and low cost.
2、刀盘调压由液压控制，结构先进，性能可靠。
2. The cutter head is controlled by hydraulic pressure, with advanced structure and reliable performance.
3、进料机构采用无级变速，对冻材、弯曲材、桉树、柞木、榆木等难剥皮树种具有很好的剥皮效果。
3. The feeding mechanism adopts stepless speed change, which has a good peeling effect on the cold wood, bending wood, eucalyptus, oak, elm and other difficult tree species.
4、剥皮净度高，生产率高，木质损伤小。
4. It has high peeling purity, high productivity and little wood damage.
木材去皮机工作原理：把原木、树枝桠等木材装入滚筒内，关闭进料挡板，开动机器，顺时针方向运行，木材在滚筒内随着机器的的运转，使剥刀能够将木材上的皮剥去。十五分钟后关闭机器，打开出料挡板，然后开动机器并且逆时针方向运行两分钟，剥好皮的木材即可自动由滚筒内送出。剥净率可达到95%。
Working principle of wood peeling machine: put logs, branches and other wood into the drum, close the feed baffle, start the machine, and run clockwise. With the operation of the machine in the drum, the peeling knife can peel off the wood. After 15 minutes, turn off the machine, open the discharge baffle, and then start the machine and run counter clockwise for two minutes. The peeled wood can be automatically sent out of the drum. The stripping rate can reach 95%.
木材去皮机适用范围：适合对新伐针叶材和部份阔叶材进行剥皮处理，也可完成部份冻材、干材的剥皮处理。
Application scope of wood peeling machine: it is suitable for peeling new coniferous wood and part of broad-leaved wood, as well as partial frozen wood and dry wood.