秦皇岛空调维修匠心售后

There are many types of rotary cutting machines, and the judging types are classified according to the number of clamping shaft, the power source of clamping shaft, the diameter of logs and the length of rotary logs.

根据卡轴数量可分为单卡轴旋切机、双卡轴旋切机和无卡轴旋切机。

According to the number of shaft, it can be divided into single axis rotary cutting machine, double axis rotary cutting machine and non card axle rotary cutting machine.

根据卡轴夹动力来源可分为机械式、液压式单板旋切机。

According to the card shaft clamp power source can be divided into mechanical type and hydraulic type peeling machine.

根据旋切木段长度可分为10'9'8'6'4'3'以下的单板旋切机。

According to the peeler length can be divided into the following 10'9'8'6'4'3'veneer rotary cutting machine.

根据旋切木段的直径大小可分为2.0m、1.6m、1.3m、1.0m、0.8m、0.5m以下的单板旋切机。

According to the peeling block size can be divided into 2.0m, 1.6m, 1.3m veneer lathe, 1.0m, 0.8m, 0.5m following cutting machine.

旋切机的工作原理是原木作定轴心旋转，旋刀作直线运动，刀刃平行于木材纤维而作垂直木材纤维长度方向上的切削运动叫做旋切。

The working principle of the rotary cutting machine is that the log is rotated by the center of the axis, and the rotary knife moves in a straight line. The cutting edge is parallel to the wood fiber, and the cutting motion in the direction of vertical wood fiber is called rotary cutting.