| 木材去皮机特点: |
| 添加时间：2019/10/14 15:41:03 浏览次数： |
| 木材去皮机特点: Wood peeler features: 1、采用四面刃刀具，使用方便，成本低。 1. The four-edged cutting tool is easy to use and low in cost. 2、刀盘调压由液压控制，结构先进，性能可靠。 2. The pressure regulation of cutter head is controlled by hydraulic pressure, with advanced structure and reliable performance. 3、进料机构采用无级变速，对冻材、弯曲材、桉树、柞木、榆木等难剥皮树种具有很好的剥皮效果。 3. The feeding mechanism adopts stepless speed change, which has a good peeling effect on frozen wood, bending wood, eucalyptus, oak, elm and other hard-to-peel tree species. 4、剥皮净度高，生产率高，木质损伤小。 4. High peeling purity, high productivity and little wood damage. 木材去皮机工作原理:把原木、树枝桠等木材装入滚筒内，关闭进料挡板，开动机器，顺时针方向运行，木材在滚筒内随着机器的的运转，使剥刀能够将木材上的皮剥去。十五分钟后关闭机器，打开出料挡板，然后开动机器并且逆时针方向运行两分钟，剥好皮的木材即可自动由滚筒内送出。剥净率可达到95%。 The working principle of the wood peeler: put logs, branches and other timber into the drum, close the feeding baffle, start the machine, run clockwise, the timber in the drum with the operation of the machine, so that the peeling knife can peel off the wood. Fifteen minutes later, shut down the machine, open the discharging baffle, then start the machine and run counter-clockwise for two minutes. The peeled wood can be automatically sent out from the drum. The peeling rate can reach 95%. |
| 上一页 木材剥皮机所属领域 |
| 下一页 旋切机是生产胶合板的主要设备之一 |
Copyright © 技术支持：遨游网络