| 对家用空调器常见故障的判断基本方法 |
| 添加时间：2024/1/2 16:13:09 浏览次数： |
| 对家用空调器常见故障的判断基本方法是:看、听、摸、测、分析。 The basic methods to judge the common faults of household air conditioners are: look, listen, touch, measure and analyze. 1、看:仔细观察空调器各部件的工作情况,重点观察电气系统、制冷系统、通风系统三部分,判断它们工作是否正常。 1. Look: carefully observe the working conditions of all parts of the air conditioner, focusing on the electrical system, refrigeration system and ventilation system to judge whether they work normally. (1)电气系统:首先查看电气连接是否接触良好，有无松动；电源电压是否处在正常范围内，观察电气系统熔丝是否熔断,电气导线的绝缘是否完整无损,电路板上是否有烧坏的痕迹。 (1) Electrical system: first check whether the electrical connection is in good contact and loose; Whether the power supply voltage is within the normal range, observe whether the fuse of the electrical system is blown, whether the insulation of the electrical wire is intact, and whether there are burn marks on the circuit board. （2）制冷系统:观察制冷系统各管路有无结霜、结露与结冰等情况;制冷管路之间连接处有无损坏或者有油污出现。特别是制冷剂管路焊接处,接头连接处有无泄漏,凡是泄漏处就会有油污,也可用肥皂水涂在有油污的地方查看有无泡沫出现，以判断是否出现泄漏。 (2) Refrigeration system: observe whether each pipeline of the refrigeration system is frosted, dewed and frozen; Check whether there is damage or oil stain at the connection between refrigeration pipelines. In particular, check whether there is any leakage at the refrigerant pipeline welding and joint connections. If there is any leakage, there will be oil stain. You can also use soapy water to smear it on the greasy place to check whether there is any foam to judge whether there is any leakage |
| 上一页 移机人员上门拆机并带齐全套工具及安全设备。 |
| 下一页 空调常见故障维修步骤/方法 |
Copyright © 技术支持：遨游网络